PPI means pixels per inch. It describes how many pixels of your image are spread across each inch of paper. DPI means dots per inch, and it describes how many ink dots a printer places per inch. People often mix them up, but for checking whether a photo is big enough, you want PPI.
Which number should you check?
Check PPI. Divide the pixel width of your photo by the print width in inches. A 6,000 pixel wide photo printed 20 inches wide has 300 PPI.
How much PPI do you need?
- 300 PPI for fine art and anything held in the hand.
- 150 to 200 PPI for most wall prints.
- 50 to 100 PPI for large graphics viewed from several feet.
- 30 PPI or less for billboards and very large banners.
Printer DPI does not change these numbers. A printer rated at 2,400 DPI still needs your image to have enough PPI.
Why 300 PPI is not a law
The 300 figure comes from prints held close to the eye. The farther away people stand, the less detail they can see, so large prints can use far fewer pixels per inch.
Worked examples with a 6,000 pixel wide photo
- At 300 PPI it prints 20 inches wide.
- At 150 PPI it prints 40 inches wide.
- At 100 PPI it prints 60 inches wide.
- At 50 PPI it prints 120 inches (10 ft) wide, fine for a wall mural seen from several feet.
- At 30 PPI it prints about 200 inches (16.7 ft) wide, fine for a lobby wall seen from across the room.
What about upscaling?
Software can enlarge an image and add pixels. Modest enlargement, up to about 2×, often looks fine. Larger jumps can create smooth, artificial-looking detail, so test a section before printing the whole job.
Quick checklist
- Use the original file, not a version saved from social media or messaging apps.
- Check the pixel size, not the “DPI” setting in your editing software.
- Decide how far away people will stand.
- Ask your printer what they need for your size and material.