Home / Business uses / hotel lobby mural

Image size for a hotel lobby mural

A hotel lobby mural is seen from across a large room, so it needs far fewer pixels per inch than a framed print. What matters most is a clean, low-noise file, the right crop for the wall, and a material that meets your building’s fire and cleaning requirements.

This guide walks through the decisions in the order you will meet them: measuring, choosing a material, checking your image, preparing the file and ordering.

Recommended file sizes

These targets assume people view the print from roughly 15 ft away, which needs about 30 pixels per inch.

SizeGoodBest
Reception wall 10 × 8 ft2,700 × 2,160 px3,600 × 2,880 px
Feature wall 16 × 9 ft4,320 × 2,430 px5,760 × 3,240 px
Corridor panel 6 × 8 ft1,620 × 2,160 px2,160 × 2,880 px

Choose the material first

The material decides the finish, the seams and what installation involves, so settle it before you finalise the image.

  • Self-adhesive wall vinyl. Durable and wipeable. It suits smooth, sealed walls and is installed in panels.
  • Paste-the-wall wallpaper (non-woven). Gives the most seamless, high-end look on a feature wall. It is harder to remove cleanly.
  • Fabric or textile wall coverings. Soften sound and can hide minor wall flaws. Often used where acoustics matter.

Ask each printer for a printed sample of the exact material so you can judge texture, sheen and colour in your own lobby lighting.

How many pixels you actually need

People standing in a lobby are usually 10 to 20 ft from the wall, so about 30 pixels per inch (PPI) at full size already looks sharp. Higher is safer where guests walk close to the wall, such as beside a reception desk or lift.

Worked example: a 16 × 9 ft feature wall (192 × 108 in). At 30 PPI you need 5,760 × 3,240 pixels, which is about 19 megapixels. A 45 MP camera file (8,192 × 5,464) covers this wall at roughly 43 PPI after cropping to the wall’s shape, so it is comfortably enough. A 12 MP phone photo (4,032 × 3,024) gives only about 21 PPI, so it would look soft up close and would need upscaling or a different wall.

If you want a premium result at 50 PPI, the file would need 9,600 × 5,400 pixels, about 52 MP. You can reach that by stitching several frames, or by upscaling a good file by up to about 2×. Upscaling invents detail, so ask the printer to check a test section.

Prepare the file

  • Crop to the wall’s shape, not the photo’s. A 3:2 photo will not fit a 16:9 wall without cropping, so decide what to lose before you order.
  • Add bleed. Printers usually ask for 2 to 3 in of extra image on every edge to allow for trimming and uneven walls. Confirm the exact amount with them.
  • Plan the seams. Murals are printed in panels. Keep faces, text and fine detail away from seam lines, and ask where the printer will place them.
  • Mind obstructions. Note doors, light switches, sockets, vents, fire exits, signage and TVs so nothing important is hidden or cut.
  • Work from the original file, not a copy downloaded from social media or messaging apps, which is compressed.
  • Colour. Send an RGB file unless the printer asks otherwise, and ask for their colour profile or a proof.

Fire safety and building rules

Hotels usually have strict rules for materials on walls in public areas. Ask the printer for the material’s fire-test certificate and check it against your local requirements. In the US that is often a Class A rating under ASTM E84. In the UK and EU, printers commonly quote a Euroclass B-s1,d0 rating. Requirements vary by building, so confirm with your fire safety officer, insurer or local building authority before you buy.

What affects the price

Every project is quoted individually. The main drivers are the wall area, the material, the number of panels, how high the wall is (lifts or scaffolding add cost), wall preparation, fire certification, rush timing and whether the printer installs. Out-of-hours installation in a working hotel can add to the total. Collect two or three written quotes using the same measurements so you can compare them fairly.

Questions to ask a printer before you order

  • Can you show a printed sample of this material and finish?
  • What is the fire rating, and do you have the test certificate?
  • What resolution do you need for this wall and viewing distance?
  • How will you handle seams, and can I approve a seam plan?
  • Do you install, and are you insured for work in a live hotel?
  • What is the lead time from artwork approval to installation?
  • What is the process if a panel is damaged or the colour is wrong?

Common mistakes

  • Ordering from a file that is too small and hoping the printer can fix it.
  • Choosing a glossy finish for a wall with strong lighting, which creates glare.
  • Forgetting that doors, desks and light fittings hide part of the image.
  • Approving artwork without checking the wall measurements on site.
  • Skipping a sample, then finding the colour looks different under hotel lighting.

Tips before you order

  • Start from the original camera file, not a social media copy.
  • Measure the wall yourself and check the printer’s figures.
  • Approve a printed sample before the full order.
  • Book installation for a quiet period to avoid disturbing guests.
Planning this project?

Tell us the wall size and timeline and we’ll match you with a print partner. Request a quote

Test your image

No file? Enter the pixel size instead

Print size

Viewed from

0pixels per inch at this size

0400+

Scale preview

Largest size by quality

What next?

Frequently asked questions

What resolution does a hotel lobby mural need?

At typical lobby viewing distances of 10 to 20 ft, about 30 to 50 pixels per inch at full size looks sharp. Use the higher end if guests will walk close to the wall.

Can a phone photo be used for a lobby mural?

A 48 MP phone photo can work for a wall viewed from several feet away. A standard 12 MP phone photo usually needs upscaling and a longer viewing distance, so test it first.

What is the best material for a hotel lobby wall?

It depends on the wall and the rules for your building. Wall vinyl suits smooth, sealed walls and cleaning. Non-woven wallpaper gives a seamless feature wall. Fabric helps with acoustics. Always check the fire rating.

How much bleed should I add?

Printers commonly ask for 2 to 3 inches on each edge, but confirm the exact figure with yours.

How long does a mural take?

It depends on the size, material and installer. Ask for a timeline that covers artwork approval, proofing, printing and installation, and add buffer for revisions.

Can the mural be removed later?

Vinyl and fabric can usually be removed, sometimes leaving adhesive residue or marks. Paste-the-wall wallpaper can be harder to remove. Ask the printer about removal before you choose.

Related

Get matched with a print partner

Tell us what you need. We’ll connect you with a suitable large-format printer, wholesale lab or equipment supplier.