Home / Business uses / storefront window graphics

Image size for a storefront window graphics

Window graphics are read from the pavement and the street, so they can use lower resolution than indoor prints. The bigger challenges are daylight, reflections, what sits behind the glass and whether people inside still need to see out.

This guide covers choosing the film, working out the pixels you need, preparing artwork for glass and getting it installed cleanly.

Recommended file sizes

These targets assume people view the print from roughly 15 ft away, which needs about 30 pixels per inch.

SizeGoodBest
Single pane 4 × 6 ft1,080 × 1,620 px1,440 × 2,160 px
Shopfront 10 × 7 ft2,700 × 1,890 px3,600 × 2,520 px
Full window run 20 × 8 ft5,400 × 2,160 px7,200 × 2,880 px

Choose the right film

  • Perforated window film (one-way vision). A full-colour image shows from outside while tiny holes let people inside see out. It is the usual choice when the graphic covers most of the glass.
  • Printed adhesive vinyl. Solid and bright, but it blocks the view and the light. Best for lower panels, partial coverage or frosted effects.
  • Cut vinyl lettering. Opening hours, logos and simple messages with no printed image.
  • Static cling or removable film. Good for short promotions and seasonal changes.

Ask your installer which side of the glass the film should go on for your chosen product, and whether your glass type is suitable. Some films absorb heat and can stress certain kinds of glass, so check any glazing warranty first.

How many pixels you need

Window graphics are read from several feet away, so about 30 pixels per inch (PPI) at full size already looks sharp. Perforated film also softens fine detail, so you rarely need more.

Worked example: a 10 × 7 ft shop window (120 × 84 in). At 30 PPI you need 3,600 × 2,520 pixels, about 9 megapixels. A 12 MP phone photo (4,032 × 3,024) gives roughly 34 PPI on this window, so it is just enough. A 45 MP camera file gives about 65 PPI. For a 20 × 8 ft window run (240 × 96 in), a phone photo drops to about 17 PPI, which is too low, while a 45 MP file gives about 34 PPI and works.

Prepare artwork for glass

  • Use high contrast. Perforated film reduces colour brightness, so pale and low-contrast images look washed out in daylight.
  • Measure the glass, not the frame. Note mullions, door handles, curved corners and security grilles, and tell the printer where the image should break.
  • Keep text large and simple. A common signage rule of thumb is about 1 inch of letter height for every 10 feet of viewing distance.
  • Plan for what is behind the glass. Shelves, lights and displays show through lighter areas of the image.
  • Add a small bleed and confirm the amount with your printer.

Daylight, reflections and night

Daylight and reflections change how a window looks across the day. Ask for a printed sample and view it on the actual glass in morning, midday and evening light. At night, interior lighting can make perforated film look different, so check that too.

Rules, permits and landlords

Some towns limit how much of a window can be covered by signs, and landlords may have their own rules. Check local signage regulations and your lease before ordering, and ask your installer whether they handle approvals.

Installation and removal

Glass must be clean and dry, and temperature matters during application. Ask whether the installer works at quiet times, how long the film needs before the window is cleaned, and how it will be removed. Most window films are designed to come off cleanly, but removal time and residue depend on age and sun exposure.

Common mistakes

  • Using a pale, low-contrast image on perforated film.
  • Measuring the frame instead of the glass.
  • Ignoring seams and mullions in the layout.
  • Choosing solid vinyl and blocking the view from inside.
  • Not checking local signage rules.

Tips before you order

  • Measure the glass, not the frame, and allow for mullions.
  • Use high-contrast images for perforated film.
  • Confirm local rules for window coverage and signage.
  • Ask whether the graphic goes on the inside or outside of the glass.
Planning this project?

Tell us the wall size and timeline and we’ll match you with a print partner. Request a quote

Test your image

No file? Enter the pixel size instead

Print size

Viewed from

0pixels per inch at this size

0400+

Scale preview

Largest size by quality

What next?

Frequently asked questions

What resolution do window graphics need?

About 30 to 40 pixels per inch at full size is usually enough because people view them from several feet away.

Can people still see out through perforated film?

Yes, from inside the tiny holes let you see out, though the view is slightly dimmed. At night, interior lighting can make the image look different.

Do I need a permit for window graphics?

Some towns regulate signage and window coverage. Check local rules and your lease, or ask your installer.

Which side of the glass does the film go on?

It depends on the product and the glass. Ask your installer to confirm for your window.

Can window film be removed?

Most window films are made to be removed. Time, sun exposure and the adhesive affect how easily, so ask the installer about removal.

Can I use a phone photo?

For a single shop window, a 12 MP phone photo can be just enough. Larger windows need a higher-resolution camera file.

Related

Get matched with a print partner

Tell us what you need. We’ll connect you with a suitable large-format printer, wholesale lab or equipment supplier.