Home / Business uses / trade show backdrop

Image size for a trade show backdrop

Trade show backdrops are viewed from the aisle and from inside the booth, so they must read quickly from a distance and still look good up close. Fabric tension backdrops are the most common choice because they are light, reusable and easy to ship.

This guide covers the specifications to confirm first, how many pixels you need, how to lay out the artwork and what to check before show day.

Recommended file sizes

These targets assume people view the print from roughly 15 ft away, which needs about 30 pixels per inch.

SizeGoodBest
Pop-up stand 8 × 8 ft2,160 × 2,160 px2,880 × 2,880 px
Straight backdrop 10 × 8 ft2,700 × 2,160 px3,600 × 2,880 px
Large booth wall 20 × 10 ft5,400 × 2,700 px7,200 × 3,600 px

Start with the booth and the printer’s template

Check the exhibitor manual for your booth size and any height limits on back walls and structures, which are often around 8 ft in a standard in-line booth but vary by show. Then ask your printer for the template for your exact stand. Each stand has its own dimensions, fold lines, curves and safe zones, and designing without it is the most common cause of cut-off text and logos.

Choose the backdrop type

  • Fabric tension backdrop. Dye-sublimation printed polyester stretched over a frame. Light, creases less and can be reused.
  • Pop-up fabric display. Curved or straight frame with a magnetic or fabric graphic. Quick to set up.
  • Rigid panels. Printed foam or aluminium composite panels. More durable and often cleaner at the seams, but heavier to ship.
  • Roll-up and banner stands. A low-cost option for supporting walls or smaller events.

How many pixels you need

Visitors see the backdrop from 6 to 15 ft or more, so about 30 to 50 pixels per inch (PPI) at full size is usually enough. Fabric printing also softens fine detail.

Worked example: a 10 × 8 ft straight backdrop (120 × 96 in). At 30 PPI you need 3,600 × 2,880 pixels, about 10 megapixels. A 12 MP phone photo gives roughly 31 PPI on this size, which is the minimum. A 45 MP camera file gives about 57 PPI. For a 20 × 10 ft booth wall (240 × 120 in), a 45 MP file gives about 34 PPI, which works from the aisle.

Layout that works on a show floor

  • Put the main message at eye level. The upper-middle band is seen first. The lower third is often hidden by counters, tables and people.
  • Keep it short. One clear headline and one image beats a busy wall.
  • Size text for distance. A common signage rule of thumb is 1 inch of letter height per 10 ft of viewing distance.
  • Use vector logos and brand colour values.
  • Mind the safe zone. Keep logos and text away from frame edges and fold lines.

Before show day

  • Ask for a proof and check the colours and cut lines.
  • Confirm the delivery date, and check whether the show has advance warehouse deadlines or direct-to-booth shipping.
  • Ask how to store and iron or steam the fabric so it travels well.
  • Order a spare graphic if you exhibit often or the event is critical.

Common mistakes

  • Designing without the printer’s template.
  • Putting the logo where a table will cover it.
  • Using a low-resolution image from a website.
  • Ordering too late for show shipping deadlines.
  • Cramming too much text onto the wall.

Tips before you order

  • Download the supplier template before designing.
  • Keep logos and text out of the zones hidden by tables or fold lines.
  • Use RGB images unless the printer asks for CMYK.
  • Order a spare graphic if you exhibit often.
Planning this project?

Tell us the wall size and timeline and we’ll match you with a print partner. Request a quote

Test your image

No file? Enter the pixel size instead

Print size

Viewed from

0pixels per inch at this size

0400+

Scale preview

Largest size by quality

What next?

Frequently asked questions

What resolution should a trade show backdrop be?

About 30 to 50 pixels per inch at full size is typically fine. Logos and text should be vector files.

Can I reuse a backdrop at different sizes?

Only if the image has enough pixels and the layout still works when the shape changes.

Fabric or rigid panels?

Fabric is lighter and easier to ship. Rigid panels are more durable and often cleaner at the seams. Choose based on how often you travel and how much handling the display gets.

How far ahead should I order?

Allow time for artwork, proofs, production and shipping, and check the show’s deadlines. Ordering several weeks ahead is safer.

Do I need to send CMYK or RGB?

Send what your printer requests. Many accept RGB and convert it, but ask so colours match your brand.

How do I look after a fabric backdrop?

Store it folded or rolled as the printer advises, and steam or iron on a low setting if needed. Follow the printer’s guidance.

Related

Get matched with a print partner

Tell us what you need. We’ll connect you with a suitable large-format printer, wholesale lab or equipment supplier.